SUBMERSIBLE Pumps
The rental industry’s leading submersible pumps
for over 30 years
for over 30 years
US40A
US75A
US40A
DETAILS
- Extremely low amperage draw
- Built-in Texas InstrumentsTM auto-cut thermal protection
- Rugged cast-iron body for exceptional durability
- Horizontal as well as vertical discharge capabilities
fEATURES
| Power cable | Heavy-duty cabtyre cable is designed to withstand harsh conditions in various types of working environments. Very low replacement cost. |
| Auto-Cut | Automatic reset type thermal protector, embedded at the neutral/start point of the motor winding to protect the motor against overheating due to overcurrent/overloading during pump running. |
| Motor | The driving force of the pump, is designed to give a high level of efficiency & torque. Class F (155C) Motor installation. |
| Shaft Seal | Very reliable double-face Silicon Carbide mechanical seals are used to ensure longer service life. |
| Impeller | Powerful vortex action is brought about by an efficiently designed radial vane type impeller. With this design, it greatly reduces the risk of clogging at the impellar vanes. The clearance between impeller and suction cover is not as critical as in the case of a conventional centrifuge type impeller where enlargement of clearance means a considerable drop in the performance of the pump. Wider allowable clearance means larger solids & fibrous substances can be pumped without clogging. Hence, this type of impeller design offers longer wear & tear, service lifetime. |
| Casing & Suction Cover | Made from light-weight rubber-lined steel plates for better resistance against corrosion and abrasion. |
| Strainer | The castform strainer has bigger throughlet holes. As a result of non-clog vortex action, the pump is able to pump out larger solids and fibrous-form substances with-out choking. |
| Hose Coupling | Specially designed to allow the user to choose either to pump vertically or horizontally by a mere switch of the connection angle. (US40A, US75A) |
| Float Switch | Option permits use in sumps or locations where waterflow is intermittent. |
Specifications
| Discharge - mm. (in.) | 50 (2") npt thread |
| Max. capacity - GPH | 3600 |
| Max. head - m (ft.) | 10.5 (35) |
| Motor HP | 1/2 |
| R.P.M | 3600 |
| Voltage / Amps | 11/6.9 |
| Weight - kg (lbs.) | 17 (37.5) |
| Height - cm. (in.) | 36.5 (14.4) |
| Diameter - cm. (in.) | 24 (9.4) |
| Solids capacity - mm. (in.) | 8 (5/16) |
US75A
DETAILS
- US75a is equipped with a MLC20P Float Switch
- Extremely low amperage draw
- Built-in auto-cut thermal protection
- Rugged cast-iron body for exceptional durability
- Horizontal as well as vertical discharge capabilities
fEATURES
| Power cable | Heavy-duty cabtyre cable is designed to withstand harsh conditions in various types of working environments. Very low replacement cost. |
| Auto-Cut | Automatic reset type thermal protector, embedded at the neutral/start point of the motor winding to protect the motor against overheating due to overcurrent/overloading during pump running. |
| Motor | The driving force of the pump, is designed to give a high level of efficiency & torque. Class F (155C) Motor installation. |
| Shaft Seal | Very reliable double-face Silicon Carbide mechanical seals are used to ensure longer service life. |
| Impeller | Powerful vortex action is brought about by an efficiently designed radial vane type impeller. With this design, it greatly reduces the risk of clogging at the impellar vanes. The clearance between impeller and suction cover is not as critical as in the case of a conventional centrifuge type impeller where enlargement of clearance means a considerable drop in the performance of the pump. Wider allowable clearance means larger solids & fibrous substances can be pumped without clogging. Hence, this type of impeller design offers longer wear & tear, service lifetime. |
| Casing & Suction Cover | Made from light-weight rubber-lined steel plates for better resistance against corrosion and abrasion. |
| Strainer | The castform strainer has bigger throughlet holes. As a result of non-clog vortex action, the pump is able to pump out larger solids and fibrous-form substances with-out choking. |
| Hose Coupling | Specially designed to allow the user to choose either to pump vertically or horizontally by a mere switch of the connection angle. (US40A, US75A) |
| Float Switch | Option permits use in sumps or locations where waterflow is intermittent. |
Specifications
| Discharge - mm. (in.) | 76 (3") npt thread |
| Max. capacity - GPH | 5700 |
| Max. head - m (ft.) | 18.5 (60) |
| Motor HP | 1 |
| R.P.M | 3600 |
| Voltage / Amps | 115/8.9 |
| Weight - kg (lbs.) | 21 (46) |
| Height - cm. (in.) | 43 (16.9) |
| Diameter - cm. (in.) | 27.4 (10.4) |
| Solids capacity - mm. (in.) | 8 (5/16) |